ATTENTION: PLEASE READ THESE TERMS
CAREFULLY BEFORE USING THIS INTERNET SITE. USING THIS INTERNET
SITE INDICATES THAT YOU ACCEPT THESE TERMS. IF YOU DO NOT ACCEPT
THESE TERMS, DO NOT USE THIS INTERNET SITE.
DISCLAIMER: THE FOLLOWING DATA AND INFORMATION IS BEING
PROVIDED TO CUSTOMERS AS AN ACCOMMODATION FOR PLANNING PURPOSES
ONLY. THIS INFORMATION IS PROVIDED "AS IS," AND AGILENT
TECHNOLOGIES MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THIS
INFORMATION, INCLUDING ANY WARRANTY THAT THIS INFORMATION IS
COMPLETE, ACCURATE OR SUITABLE FOR CUSTOMER'S USE. FURTHERMORE,
TO THE MAXIMUM EXTENT PERMITTED BY LAW, AGILENT TECHNOLOGIES
DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR PARTICULAR USE WITH RESPECT TO THIS INFORMATION.
LIMITATION OF LIABILITY: CUSTOMER ACKNOWLEDGES THAT, TO
THE MAXIMUM EXTENT PERMITTED BY LAW, AGILENT TECHNOLOGIES WILL
HAVE NO LIABILITY WHATSOEVER ON ACCOUNT OF CUSTOMER'S USE OF, OR
RELIANCE ON THIS INFORMATION, INCLUDING LIABILITY FOR DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES
OF ANY KIND BASED ON ANY LEGAL THEORY, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Use of Site: The information contained on this site and in
any applications or tools available on the site is not intended
to be a complete listing of all Products/Services, but will be
selected to include most of the major Products/Services that the
Customer typically orders. Agilent Technologies will attempt to
accommodate whatever requests the Customer may have regarding the
selection of Product information; but the final decision on the
information included rests solely with Agilent Technologies.
Agilent Technologies will use its reasonable efforts to provide
current information. However, as a result of limitations inherent
in the production of this type of information, the Customer
understands that it will not be possible for Agilent Technologies
to ensure that all information for every Product /Service is
complete or accurate and therefore agrees to accept the
information on an "estimate" basis only. Both parties
agree that the Customer is solely responsible for the application
software (WWW browser) and Internet connectivity used to access
this application.
Use of Software. If Customer downloads software
from this Site ("Software"), use of the Software is
subject to the license terms in the Software License Agreement
that accompanies or is provided with the Software. Customer may
not download or install the Software until reading and accepting
the terms of the Software License Agreement. Both parties agree
that the Customer is solely responsible for the application
software (WWW browser) and Internet connectivity used to access
this application.
General: Agilent Technologies may revise these Terms of
Use and Software License Agreement at any time by updating this
posting. You should visit this page from time to time to review
the then-current Terms of Use because they are binding on you.
Certain provisions of these Terms may be superseded by expressly
designated legal notices or terms located on particular pages at
this Site. Your existing Terms and Conditions with Agilent
Technologies including those related to service, supply of
products and/or other business transactions will continue to
apply together with these Terms of Use.
Specific Terms:
1. Registration: The Customer is responsible for assuring
authorization from Customer's company prior to registration.
Customer is also responsible for keeping a personal login and
password/PIN confidential after registration. Each customer
is required to keep an on-line profile current and accurate.
2. Company Invoicing Number: THE STATUS INFORMATION
INDICATED IS CALCULATED BASED ON CUSTOMER’S INVOICING
NUMBER. The customer invoice number depends in part on the
customer’s invoicing address. In the case that multiple
customer’s sites are invoiced to a unique invoicing address
without ability to create unique customer numbers, status reports
will provide visibility for all company’s instruments
associated with the company’s invoicing address (and not by
customer user-site). It is the Customer’s responsibility to
inform Agilent Technologies of problems concerning identification
of customer user-sites within the Company organization.
3. Accessibility: Agilent Technologies will use its
reasonable efforts to provide access to this site and its tools
and applications. However, the Customer understands that the
information may not be available continually or that it may be
changed without notice.
4. Frequency of Updates: Agilent Technologies will use its
reasonable efforts to update the information on a nightly basis.
Agilent Technologies will also use its reasonable efforts
to update any significant changes or corrections. The Customer
understands that, because of the volume of data being provided,
Agilent Technologies cannot guarantee that all changes or
corrections can be implemented or notification made.
5. Limitations on Use of Data: ALL INFORMATION PROVIDED ON
THIS SITE IS AGILENT TECHNOLOGIES CONFIDENTIAL AND IS
PASSWORD/PIN PROTECTED. Agilent Technologies is providing this
information solely for the Customer's use in its own equipment
management processes, and Customer agrees not to disseminate this
information for any other purpose or through any other method
including electronic or mechanical. The information cannot
be disclosed without Agilent Technologies' prior written consent.
Agilent Technologies will provide this data as described above
but reserves the right to discontinue this service at any time.
6. Cost to the Customer: The following advanced features
are being provided by Agilent Technologies to the Customer on a
no-cost basis.
- Repair and Calibration status
- Calibration Due Notification
- Instrument Service Logging
7. Termination: If the Customer is no longer in good
standing or if it breaches these Terms of Use, then Agilent
Technologies may terminate Customer's access to this information
immediately.
8. User Submissions. Any material, information or
other communication Customer transmits or posts to this Site will
be considered non-confidential and non-proprietary
("Communications"). Agilent Technologies will have no
obligations with respect to the Communications. Agilent
Technologies and its designees will be free to copy, disclose,
distribute, modify, incorporate and otherwise use the
Communications and all data, images, sounds, text, and other
things embodied therein for any and all commercial or
non-commercial purposes. Customer is prohibited from posting or
transmitting to or from this Site any unlawful, threatening,
defamatory, obscene, pornographic, or other material that would
violate any law.
9. Links to other Web Sites. Links to third party
Web sites on this Site are provided solely as a convenience to
Customer. If Customer uses these links, Customer will leave this
Site. Agilent Technologies has not reviewed all of these third
party sites and does not control and is not responsible for any
of these sites or their content. Agilent Technologies does not
endorse or make any representations about them, or any
information, software or other products or materials found there,
or any results that may be obtained from using them. Customer's
decision to access any of the third party sites linked to this
Site is at Customer's own risk.
10. U.S. Government Restricted Rights. Government
users will receive no greater than Restricted Rights as defined
in FAR 52.22714, FAR 52.22719(c)(12) (June 1987) or DFAR
252.2277013(c)(1)(ii) (Oct 1988), DFAR 252.2217015(c)(May 1991),
DFAR 252.2277014, or DFAR 252.2277018 or successor legislation as
applicable in any Software at this Site. Government users will
secure no greater than limited rights as defined in FAR 52.22714,
DFAR 252.2277015, DFAR 252.2277018, or DFAR 252.2277013 or
successor legislation as applicable in any technical data at this
Site.
11. Electronic Messages. Messages (including but
not limited to orders and acknowledgements) submitted
electronically will have the same legal effect, validity and
enforceability as if they were submitted in writing. In case
local law requires information to be in writing, such requirement
shall be deemed met by electronic messages generated, sent,
received, stored or otherwise processed in connection with this
Site.
12. Applicable laws. To the extent allowed by local
law, these Terms will be governed by and construed in accordance
with the laws of the country where Customer’s Agilent
Technologies Test and Measurement Instrument entity is located,
without giving effect to any principles of conflicts of laws, and
any dispute relating to these Terms will be referred to the
courts of such country. Agilent Technologies makes no
representation that materials at this Site are appropriate or
available for use in any country outside the above mentioned
country, and access to these materials from territories where
their contents are illegal is prohibited. If Customer chooses to
access this Site from outside such country, Customer does so on
Customer's own initiative and is responsible for compliance with
applicable local laws.